Skip to content
- Machine: S12NC2
- Automation: Cross Type for One clamping with vibration hopper
- Feature: Auto dressing and infeeding compensation. The tolerance is below 1 micrometer
- Infeeding volume: 0.2mm (size 12-16mm)
- Cycle Time: 8 seconds
- Dressing No.: 120 pcs (finishing in one time)
- Machine: S18+Hydraulic infeeding system with PLC
- Automation: Cross Type for two clamping with ladder and loading syste
- Infeeding volume: 0.2mm (Size A:10 B:20 C:16)
- Cycle Time: 25 seconds
- Dressing No.: 120 pcs (finishing in one time)
- Machine: S18NC6
- Automation: 3 axes servo control
- Infeeding volume: 0.5mm +
- Cycle time: 90 sec.
- Material: fiberglass
- Reason: keep operator away from the employee
- Machine: S-18S
- Automation: loading support and unloading system
- Material: tungsten carbide
- Reason: when 2 workpiece touching together. the roundness would be bad.
- Roughness grinding: 0.15mm per infeeding.
- Machine: S-12
- Automation: Semi-loading and unloading system
- Material: SKD
- Size:1. A:6mm B:mm 2. A:8mm 10:mm
- Reason: 2 steps are needed to grind in one time. the roundness for both two should be below 0.002mm
- Machine: S-18
- Automation: Cross type with one clamping and ladder
- Material: S45C /S35C
- Wokrpiece: motocycle part
- Reason: wish cycle time in 5 sec.
- Roundness: below 0.005mm
- Size control: beloww 0.01mm
- Machine: S-18S
- Automation: Thrufeed Grinding (Belt type) 3-25mm
- Material: S35C
- Wokrpiece: Printer shaft 5X400mmL
- Reason: wish cycle time in 6 sec. 0.15mm reservation
- Roundness: below 0.005m
- Straight:0.02mm below
- Ra: 0.4-0.8 no more less or bigger
- Grinding wheel:
- Size control: beloww 0.01mm (one hour)
- dressing time: 2Hours
- Machine: S-12S
- Automation: Automation for Thrufeed Grinding (Gear type)
- Material: tungsten carbide (ex: 6x50L)
- Rough Grinding: 0.25 mm in one time in 3 sec. Roundness in 0.003mm. Size control in 0.003mm. Cylindricity in 0003 mm ( 300 pcs test)
- Finish Grinding: 0.01mm aroundRoundness in 0.001mm. Size control in 0.002mm. Cylindricity in 0001 mm ( 300 pcs test).
- Grinding wheel: Diamond grinding wheel
