Description
A smart and economic choice makes save your energy. The auto infeeding device instead of the handle bar repeat the action easily. Adjusting way which only one switch turning can decide the start working point . How easy !!! only taking 5 mins, you would get use to NC1 system.
The tranditional way is using “Hydraulic System”. Too many compnents are hard to control and repaired. Considering these issue, we make this type instead of tradional hydraulic system.
PLC－FX3U－32MR－ES－A
Interface－GS2107-WTBD7″
Positioning module－AX2N-10GM
| Model | Unit | S-12NC | S-18NC | S-20NC |
| Controller | ||||
| MITSUBISHI | ||||
| CAPACITY | ||||
| Grinding Range(dia.) | mm | 1-30 | 30-80 | 2-50 |
| Grinding wheel size(dia.*W*H) | mm | 305*150*120 | 455*205*228.6 | 510*205*254/304.8 |
| Regulating wheel size(dia.*W*H) | mm | 205*150*90 | 255*205*111.2 | 305*205*127 |
| SPINDLD SPEEN | ||||
| Grinding wheel speed | m/min | 2000 | 1500 | 1350 |
| Regulating wheel speed | R.P.M | 0-308 | 0-308 | 0-308 |
| DRIVEN MOTORS | ||||
| Grinding wheel motor | HP | 10 | 15 | 20 |
| Regulating wheel motor(Servo Delta) | k.w | 2 | 3 | 4 |
| Hydraulic pump motor | HP | 1 | 1 | 1 |
| Coolant pump motor | HP | 1/8 | 1/4 | 1/2 |
| FEED SLIDE | ||||
| Upper slide feed graduation | mm | 0.025 | 0.05 | 0.05 |
| Upper slide micro feed graduation | mm | 0.001 | 0.001 | 0.001 |
| Lower slide micro feed graduation | mm | 0.001 | 0.001 | 0.001 |
| Lower slider servo motor (Delta) | kw | 1 | 2 | 2 |
| Dressing device graduation | mm | 0.01 | 0.01 | 0.01 |
| Regulating wheel tile angle | deg. | ±5 | ±5 | ±5 |
| Regulating wheel swivel angle | deg. | 5 / -3 | 5 / -3 | 5 / -3 |
| MACHINE LAYOUT | ||||
| Machine Dimensions | mm | 1900*1550*1420 | 2450*2050*1600 | 2650*2150*1600 |
| Machine Weight | kgs | 1550 | 3200 | 3500 |
Reviews
There are no reviews yet.