Standard Centerless Ginding Machine

According to the methods of feed, centerless grinding can be divided into three types:

•  Through Feed Centerless Grinding
•  Infeed Centerless Grinding- to grind one step or above.   
•  End Feed Centerless Grinding – it used for taper or the grinding length more than the wheel’s. 

1. Through feed Centerless grinding :    Following on the R.W tilt angle, the workpiece will move alone with the R.w lower side. Howere, when our title angle become big, the throufeed speed is increasing as well. At the meanwhile, oppositely, our wheel usage precentage is decreasing. (seeing training)Equipped the long bar grinding device, the grinding length can achieve 3 meter.     In addition, we can offer standard throufeeding automation (belt type) is gernally used in the area, diameter from 3-25mmL and the length 50-900 mm, the basical pricipal is the length should be bigger than the diameter.    Vibaration hooper: the diameter from 3mm-12mm, the length 5mm-110mm. 
2. Infeed Centerless grinding :The critical concept that G.W line, R.W line and blade line should be in paralle.  under the G.W width, the machine can achieve the precision cylindricity below 0.002mm; roundness below 0.001mm. When it comes to profile grinding, you can discuss with our sales engineer to make the template and blade.  The general one step grinding, we can upgrade to high CP value NC1 automaiton. it can save engineer energy and increase the stability. if your workipece is more complicated and not easy to load, the advacing NC machine is recommended.